There are numerous ways to smooth the surface of the stone, and the following are specifically described below.

The first is polishing: seen as a a higher gloss on the top. The amount of time that polishing lasts is not particular, with regards to the type of rock. For instance, granite, marble, and limestone are usually polished, but preserving their luster takes a variety of maintenance.

The second reason is buffing: the feature would be that the treated surface includes a certain amount of softness and does not require very much care. In general, marble and limestone and slate are more desirable for polishing.

The 3rd type is pickling: however the treated surface will keep traces of corrosion, and there will be few scratches for the pickling surface, and the appearance could be more rustic than the polished surface. A large part of the stone can be pickled, and the pickling of Kitchen Marble Vase & Fruit Dish and limestone is the most common. The most frequent approach to softening the luster of a granite is usually pickling.

The fourth may be the axe: the surface is not extremely smooth after processing. China Granite Marble Stone (http://www.chitrust.com), marble, and limestone are usually treated in a customized manner.

The fifth kind of fire: the surface of the stone is rough after the fire treatment. Granite is normally a fire surface area.

The sixth type is cracking: the surface of the treated stone can be very rough, and it is relatively smooth compared to fire. The rock that is cracked by rock is principally slate.

The seventh type is tumbling: the top of stone treated by this technique is smooth or slightly rough, as well as the corners are smooth and broken. Marble and limestone will be the most suitable stone materials for tumbling.

The last the first is cleaning, and the top of stone after brushing will look old. Brushing is the brushing of the rock surface, which is the best in simulating the natural wear of the rock.